Tuner Operations; Listening To Fm/Am Radio - Sony STR-DA5300ES Mode D'emploi

Tuner Operations

Listening to FM/AM radio

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
(page 38).
Tip
The tuning scale for direct tuning is shown below.
• FM band 100 kHz
• AM band 10 kHz*
* The AM tuning scale can be changed (page 144).
Automatic tuning
82
GB
1
Press AMP MENU to display the
GUI menu on the TV screen.
If "GUI MODE" is not displayed in the
display window of the receiver, follow the
steps given in "7: Operating the receiver
using the GUI (Graphical User
Interface)" (page 41).
2
Press V/v repeatedly to select
"FM" or "AM," then press
b.
The FM or AM menu list appears on the
TV screen.
3
Press V/v to select "Auto
Tuning," then press
4
Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1
1
Press OPTIONS.
2-4
2
Press V/v to select "FM Mode," then
press
3
Press V/v to select "MONO," then
press
.
.
or
.