Panasonic JS-960WP Serie Mode D'emploi page 24

Display Unit Replacement
Be sure to disconnect the power cable of the main block (POS Workstation) and
confirm the power is "OFF" before the operation below.
■ When fixing parts that use VESA mounts are installed
(1) While pushing in the cable cover release button, slide the cable cover with both hands
to remove it.
(2) Open the screw covers (2 locations) of the main unit.
(3) Loosen the 2 thumbscrews securing the display unit.
p The thumbscrews shall be loosened until the screws rotate without resistance.
(4) Hold both sides of the display unit and slide it out slowly to remove it.
(1)-1
Cable
cover
release
button
(3)
24
JS-960WP_eng.indd 24
(1)-2
(4)
(2)
2012/02/17 9:11:18