Battery Safety; Safety Instructions For Maintenance; Assembly - Husqvarna Rider 322T AWD Manuel D'utilisation

Masquer les pouces Voir aussi pour Rider 322T AWD:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Do not fill above recommended fuel level. The heat
from the engine and the sun makes the fuel expand
and the fuel overflows if the tank is filled too much.
Do not fill too much. If you spill fuel on the product,
clean up the spill and wait until it is dry before you
start the engine. If you spill on your clothing, change
it.
Store fuel in approved containers only.
Store the product and fuel in such a way that there is
no risk that fuel leaks or fumes can cause damage.
Drain off the fuel in an approved container outdoors
and away from naked flames.

Battery safety

WARNING: A damaged battery can cause
an explosion and cause injury. If the battery
has a deformation or is damaged, speak to
an approved Husqvarna service agent.
WARNING: Read the warning instructions
that follow before you use the product.
Use protective glasses when you are near batteries.
Do not wear watches, jewelry or other metal objects
near the battery.
Keep the battery out of reach for children.
Charge the battery in a space with good airflow.
Keep flammable materials at a minimum clearance
of 1 m when you charge the battery.
Discard replaced batteries. See
31 .
Explosive gases can come from the battery. Do not
smoke near the battery. Keep the battery away from
open flames and sparks.

Safety instructions for maintenance

WARNING: If the product is not parked
correctly and the engine and ignition is not
off, it can cause injury or damage to property
or the adjacent area. Do not do maintenance
on the engine or cutting deck unless the
conditions that follow are met:
The engine is off.
The product is parked on a level surface.
Introduction
WARNING: The drive belt tension spring can
break and cause injury. Wear protective
glasses when you attach or remove the
cutting deck.
12
Disposal on page

Assembly

The parking brake is applied.
The ignition key is removed.
The cutting deck is disengaged.
The ignition cables are removed from the
plugs.
WARNING: The exhaust fumes from the
engine contain carbon monoxide, an
odourless, poisonous and very dangerous
gas. Do not run the product indoors or in
closed spaces.
WARNING: Read the warning instructions
that follow before you use the product.
For best performance and safety, do maintenance
on the product regularly as given in the maintenance
Maintenance schedule on page 18 .
schedule. See
Electrical shocks can cause injuries. Do not touch
cables when the engine is on. Do not do a function
test on the ignition system with your fingers.
Do not start the engine if the protective covers are
removed. There is a high risk of injury caused by
moving or hot parts.
Let the product become cool before you do
maintenance in the engine compartment.
The blades are sharp and can cause cuts. Wind
protection around the blades or wear protective
gloves when you do work on them.
CAUTION: Read the caution instructions
that follow before you use the product.
Do not turn over the engine if the spark plug or
ignition cable has been removed.
Make sure that all nuts and bolts are tightened
correctly and that the equipment is in good condition.
Do not change the adjustment of governors. If you
run too fast, you risk damage to the machine
Technical data on page 32 for
components. See
highest permitted engine speed.
The product is approved only with the equipment
supplied or recommended by the manufacturer.
Read the assembly instructions in the owner's manual
carefully. A label on the inner side of the front cover on
the product, also shows how to attach and remove the
cutting deck.
To attach the cutting deck
1. Park the product on level ground.
270 - 001 - 28.11.2017

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières