Settings; The Initial Settings Procedure - Samsung HT-E4530 Mode D'emploi

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not configure
the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the menu
you selected.
1 . Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Initial Settings
Language screen.
Initial Settings > On-Screen Language
Select a language for the on-screen
displays.
▲
Dansk Nederlands
English Eesti keel
Suomi Français
Deutsch Ελληνικά
Magyar Italiano
Қазақ
한국어
▼
2 . Use the ▲▼◄► buttons on the remote
to select the desired language, and then
press the E button twice. The Start screen
appears.
3 · Press the E button to start setup. The
Network Settings screen appears.
Initial Settings > Network Settings (1/5)
No network cable or Samsung Wireless LAN Adapter
connected.
Please plug in a network cable or a Samsung Wireless
LAN Adapter.
4 · Connect the network cable or insert the
Samsung Wireless LAN Adapter.
22
|
English
HT-E4530_ZC_ENG_0316.indd 22 HT-E4530_ZC_ENG_0316.indd 22
All manuals and user guides at all-guides.com
5 . Press the E button to set up the product's
6 . If the connection is successful, the
Select English as the
on-screen menu
language.
Next
| NOTE
\ If the connection is not successful, select Next, and then
7 . To upgrade the software, select Update
| NOTE
\ If you skipped network set up, you must skip Software
8 · If there is a Software Update available,
Previous
Next
Skip
<Incase of Network Cable connected>
Initial Settings > Network Settings (1/5)
Network cable connected.
Press Next to configure your wired network settings.
If you want to connect to your wireless network, plug in
a Samsung Wireless LAN Adapter.
wired network connection or select Skip, and
then press the E button to skip network
setup. If you selected Skip, go to Step 9.
Connection Complete screen appears. Select
Next, and then press the E button. The
Software Update screen appears.
|
press the E button. After you have completed the Initial
Settings procedure, go to "Wired Network" on page 29 to
set up the product's wired network connection.
now, and then press the E button. To skip
the upgrade, select Update later, press the
E button, and go to Step 9.
|
Update also.
the product downloads and installs the
upgrade. This can take some time. If there
is no Software Update available, the "There
are no new software updates for you to
download. You already have the most up
to date version." message appears. And
then press the E button. The TV Aspect
Ratio screen appears.
Previous
Next
Skip
2012-03-16 오후 5:23:02 2012-03-16 오후 5:23:02