Speaker Components; Installing The Speakers On The Tallboy Stand - Samsung HT-E4530 Mode D'emploi

Connections

Speaker Components

Speaker Components
(L) (R)
FRONT

Installing the Speakers on the Tallboy Stand

1. Turn the Stand Base upside-down and
connect it to the Stand.
2. Use the driver to combine the screws on the 3
marked holes.
3. Straighten a supplied speaker wire and put in
the hole on the center of Stand Base.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw clockwise into the hole on the
rear of the speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
16
|
English
HT-E4530_ZC_ENG_0316.indd 16 HT-E4530_ZC_ENG_0316.indd 16
All manuals and user guides at all-guides.com
STAND BASE
(L) (R)
STAND SURROUND
SPEAKER CABLE
SCREW (5 15): 8EA
X
CENTER
1
Stand Base
2
Stand
3
4
5 6
SUBWOOFER
Speaker
Stand
2012-03-16 오후 5:22:44 2012-03-16 오후 5:22:44