Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 Getting Started
Recording from
another source
Use this recording method when recording
from the tuner, optional MD or tape deck, or
from a component connected to the auxiliary
inputs.
AUX
CD
TUNER
CD-R
MD
TAPE
4
7
1 Load a CD–R or CD–RW disc.
If it's a blank disc, the display indicates this.
If the disc isn't blank, use the
check that there's enough space on it for what
you want to record.
2 Switch to the source that you're
going to record.
For example, to record from the auxiliary
inputs, press
3 Prepare the source for recording.
Switch on the source component, load the
source material, tune to the station, etc.
4 Press REC (top panel only).
The CD-recorder goes into record-pause.
20
En
All manuals and user guides at all-guides.com
¢
CD-R
DISP
button to
DISP
.
AUX
5
Press CD-R to start recording.
Alternatively, press 6 on the top panel.
6
Start playing the source (if
necessary).
7
During recording:
(remote) or 6 (top panel)
• Press
-
CD
R
to pause recording. Press again to restart.
• If auto track numbering is off, press
to start a new track (see page 26 for more
on track numbering).
When you're done, press 7 to
8
stop recording.
After pressing 7, the recorder writes the track
information to the disc.
Take out the disc before switching the player
off.
REC
Publicité
Table des Matières
