Troubleshooting - Panasonic WX-ST200P Mode D'emploi

Troubleshooting

Please check the common problems listed in this table before seeking professional
help.
If none of the tips provided here help, if you are dealing with a problem not listed here, or if
you are otherwise uncertain, contact your retailer for more information.
Phenomenon
The product does not
turn ON
The [PWR] indicator
blinks red and I cannot
use the microphone
The [PWR] indicator
blinks orange and I
cannot use the
microphone
Cause/measure
⚫ Have you inserted the dry-cell battery or the
rechargeable battery?
 Make sure that the battery is inserted. 
⚫ Is the microphone currently inserted into the
charger?
 Even if the [CHG] indicator does not light up, 
the microphone cannot be turned ON as long
as it is inserted into the charger.
Take the microphone out of the charger and
then turn it ON.
⚫ Is the battery depleted?
 If it is, replace it (if it is the dry-cell battery) or 
charge it (if it is the rechargeable battery).
⚫ Is the battery inserted according to the correct
polarities? (Positive
 Make sure that the battery is inserted 
correctly.
⚫ The microphone is not paired. Alternatively,
there could have been an error during the
pairing process due to a bad connection.
 Place the microphone as close as possible to 
the antenna and try pairing it again.
⚫ The microphone may be outside of the antenna
range, and it cannot establish a connection.
 Move the microphone inside the antenna 
range.
⚫ Is the receiver turned ON?
 Make sure that the receiver is powered. 
, negative )
Reference
page
15
32
30, 32
15, 30
19
13
27
35