Recharging The Battery - Panasonic WX-ST200P Mode D'emploi

Recharging the battery

1
Turn OFF the microphone
Check that the [PWR] indicator is off.
2
Insert the microphone into the charger (WX-SZ200P)
Check that the [POWER] indicator in the charger
lights on, and place the microphone so that its
[PWR] indicator faces the front.
When the microphone is inserted into the charger,
the [CHG] indicator (red) of the microphone will
show the charging status as follows:
On: Charging
Off: Charging complete or the microphone is not
set correctly on the charger.
Blinking:
Usually caused by one of the following.
The microphone may contain a dry-cell or
deteriorated rechargeable battery, or the
battery may be absent. Make sure that the
proper type of battery is inserted.
The rechargeable battery may be outside of
its operating temperature range. Make sure
that the battery is within its operating
temperature range.
32
Charge indicator
Power indicator
Charge error indicator
Power indicator