Husqvarna 110iL Manuel D'utilisation page 15

Maintenance
Make sure that the battery charger is not damaged.
Examine all cables, couplings and connections. Make sure they are not dam-
aged and free from dirt.
Do a check of the connections between the battery and the product. Do a check
of the connection between the battery and the battery charger.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
Keypad
Problem
The LED flashes continuously.
The product does not start.
The LED flashes 3 times again and
again.
The LED flashes 5 times again and
again.
The LED flashes 7 times again and
again.
Battery
LED display
The green LED flashes.
1728 - 001 - 30.09.2021
Troubleshooting
Possible faults
Low voltage.
Push the power trigger and press the
start button at the same time.
Overcurrent.
Temperature deviation.
Logical error.
Possible faults
Low battery voltage.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
To examine and replace the trimmer
head
1. Do a check of the trimmer head for damages and
cracks.
2. Pull out the chute assembly for the trimmer line.
3. Remove the trimmer head. (Fig. 51)
4. Replace the trimmer head.
5. Assemble the trimmer head. Refer to
the trimmer head on page 12 .
Possible solutions
Charge battery.
Release the power trigger and stop
the product.
Release the power trigger and start
the product again.
Let the product cool down.
Release the power trigger and start
the product again.
Possible action
Charge the battery.
Daily Weekly Monthly
X
X
To assemble
X
15