Icons - Endress+Hauser RIA46 Instructions D'opération

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

RIA46
5.3

Icons

5.3.1 Display icons
Device is locked/operating lock; the device setup is locked against changes to parameters, the display can be
modified.
1
Channel one (Analog in 1)
2
Channel two (Analog in 2)
1M
First calculated value (Calc value 1)
2M
Second calculated value (Calc value 2)
Max
Maximum value/value of the maximum indicator of the channel displayed
Min
Minimum value/value of the minimum indicator of the channel displayed
In the event of an error:
The display shows:
Underrange/overrange:
The display shows:
!
Note!
In the dot matrix section, the error and channel name (TAG) are specified.
5.3.2 Icons in the editing mode
The following characters can be used to enter user-defined text:
'0-9', 'a-z', 'A-Z', '+', '-', '*', '/', '\', '%', '°', '
'(', ')', '~'
For numerical entries, the numbers '0-9' and the decimal point are available.
Furthermore, the following icons are used in the editing mode:
Symbol for the setup
Symbol for the Expert setup
Symbol for diagnostics
Accept entry.
If this icon is selected, the information entered is accepted at the position and the user exits the editing mode.
Reject entry.
If this icon is selected, the information entered is rejected and the user exits the editing mode. The text
configured beforehand remains unchanged.
Move one position to the left.
If this icon is selected, the cursor moves one position to the left.
Delete back.
If this icon is selected, the character to the left of the cursor is deleted.
Delete all.
If this icon is selected, all the information entered is deleted.
Endress+Hauser
, the measured value is not displayed
2
3
', '
', 'μ', '.', ',', ';', ':', '!', '?', '_', '#', '$', '"', '´',
Operating elements and display
39

Publicité

Table des Matières
loading

Table des Matières