Inserting The A 606 2/3 Level; Removing The A 606 2/3 Level - Miele APLW 511 Mode D'emploi

en - Areas of application
Inserting the
A 606 2/3 level
Removing the
A 606 2/3 level
38
The A 606 2/3 level can be inserted in the middle and top levels of the
APLW 511 mobile unit.
The 2/3 level connector can be connected to the middle or right water
connection on the mobile unit.
To avoid blocking the spray arm of the 2/3 level, the supports must
be removed at the relevant positions.
Remove the relevant supports from the middle or top level of the

mobile unit.
Plug the 2/3 level connector into the water connection on the mo-

bile unit at a flat angle.
Then push the retainer on the 2/3 level slightly towards the water in-

let and lower the 2/3 level to lock the module in place behind the
struts of the mobile unit.
Another module with injector nozzles, e.g. the A 620, can be inser-
ted in addition to the 2/3 level. Alternatively, a module for tall load
items can be inserted in the bottom level, e.g. the A 613 for pipettes.
Push the level's retainer slightly towards the water inlet and pull it

out from behind the struts of the mobile unit.
Disconnect the level from the mobile unit's water connection and

remove it.