Festo DAPZ−SB−M−250AC−DR−AR Notice D'utilisation page 32

DAPZ−...−AR
Setting the upper switching cam
S Insert the adjusting tool 1 up to the marking
in the second recess in the cam shaft.
S Set the OPEN or CLOSE position.
In order to do this use the tables as from page 33.
Setting the lower switching cam
S Insert the adjusting tool 1 up to the marking in
the first recess again.
S Set the OPEN or CLOSE position.
In order to do this use the tables as from page 33.
32
1
Fig. 21
Fig. 22
Festo DAPZ−...−AR 0711b English
1