Enabling communication between the keyboard and
mouse and the receiver
Note
Place the keyboard and receiver within the communication range given in the
specifications.
1
Set the keyboard POWER switch to ON.
2
Set the keyboard POINTING DEVICE switch to ON.
3
Set the mouse ON/OFF(power) switch to ON.
4
Press the CONNECT button on the receiver.
It may require up to 30 seconds for the receiver to recognize the
keyboard and mouse.
5
Press the CONNECT button on the keyboard.
Communication between the keyboard and the receiver starts.
CONNECT button
6
Press the CONNECT button on the receiver again.
CONNECT button
Continued on next page
GB
13