Field Settings - Panasonic CZ-02RT11P Manuel D'installation

5. Permission level function
If required, you can limit the user action by
restricting the number of operable buttons. Refer
to the chapter "Field settings".
Level Operable buttons
1 All
2 • on/off button
• schedule timer button
• temperature adjust button
• operation change/
• fan speed button
• air flow direction adjust button
3 • on/off button
• temperature adjust button
• fan speed button
For switching between level 1 permission and the
selected level in service, proceed as follows:
1 Keep the fan speed button
2 and press the 3 other indicated keys
simultaneously while keeping the fan speed
button pressed.
Refer to figure 8.
If you want to limit the user action on the remote
controller to be defined as "sub", start with only
connecting this controller to the unit. Make sure
that this controller is set to "main" (factory set)
first, change the permission level to the setting
you prefer and only then set the remote controller
to "sub".
You can now proceed with connecting the remote
controller to be defined as "main".
CZ-02RT11P
Remote controller
4PW15514-1

6. Field settings

If optional accessories are mounted on the indoor
unit, the indoor unit setting may have to be changed.
Refer to the instruction manual for each optional
accessory.
Refer to figure 7.
a Unit NO
b First Code NO
c Second Code NO
button
d Mode NO
e Field set mode
Procedure
1 When in the normal mode, press the "
button for a minimum of four seconds, and the
FIELD SET MODE is entered.
2 Select the desired MODE NO. with the "
pressed,
button.
3 During group control, when setting by each
indoor unit (mode No. 20, 21, 22 and 23 have
been selected), push the "
select the INDOOR UNIT NO. to be set. (This
operation is unnecessary when setting by
group.)
4 Push the "
FIRST CODE NO.
5 Push the "
SECOND CODE NO.
6 Push the "
settings are SET.
7 Push the "
MODE.
(Refer to figure 7)
" button and
" upper button and select
" lower button and select the
" button once and the present
" button to return to the NORMAL
Installation manual
"
"
3