Updating The Firmware (Update); Firmware Update Procedure; Checking The Firmware Version (Version) - Yamaha MusicCast R-N402 Mode D'emploi

Configuring the system settings (ADVANCED SETUP menu)

Updating the firmware (UPDATE)

New firmware that provides additional features or product
improvements will be released as needed. If the unit is
connected to the Internet, you can download the firmware
via the network. For details, refer to the information
supplied with updates.

■ Firmware update procedure

Do not perform this procedure unless firmware update is
necessary. Also, make sure you read the information
supplied with updates before updating the firmware.
1
Press SELECT/ENTER repeatedly to select
"USB" or "NETWORK" and press DISPLAY to
start firmware update.
Choices
Update the firmware using a USB memory device.
USB
Updates the firmware via the Internet.
NETWORK
y
You can also update the unit's firmware by following the
procedure in "Updating the unit's firmware via the network"
(p. 51).
Checking the firmware version
(VERSION)
Check the version of firmware currently installed on the
unit.
y
• You can also check the firmware version in "Update (Network
Update)" (p. 47) in the "SETUP" menu.
• It may take a while until the firmware version is displayed.
50
En