Listening To Dab Radio (R-N402D); Preparing The Dab Tuning; Selecting A Dab Radio Station For Reception - Yamaha MusicCast R-N402 Mode D'emploi

Réseau ampli-tuner
Masquer les pouces Voir aussi pour MusicCast R-N402:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 62
DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more stable reception compared to analog
signals. This unit can also receive DAB+ (an upgraded version of DAB) that allows for more stations using MPEG-4
audio codec (AAC+), which has a more efficient transmission method.
Note
This unit supports Band III (174 to 240 MHz) only.

Preparing the DAB tuning

Before tuning in to DAB stations, an initial scan must be
performed. When you select the DAB for the first time,
the initial scan is performed automatically.
To listen to a DAB station, connect the antenna as
described in "Connecting the DAB/FM antenna (R-
N402D)" (p. 12).
DIMMER
A
COAXIAL
LINE 1
NET
TUNER
TUNER
MODE
MEMORY
1
Press TUNER to select "TUNER" as the input
source.
2
Press BAND to select the DAB band.
The initial scan starts. During the scan, the progress is
displayed on the front panel display.
When the scan is complete, the top of the list of the
scanned stations appears on the front panel display.
y
• If no DAB radio stations are found by an initial scan,
"Not Found" will appear on the front panel display,
followed by "Off Air". Press BAND twice to re-select the
DAB band and scan again.
• You can check reception strength of each DAB channel
label (p. 33).
• To perform an initial scan again after some DAB radio
stations are stored, select "Initiate Scan" (p. 44) in the
"OPTION" menu. If you perform an initial scan again, the
DAB radio stations currently registered to the preset
numbers will be cleared.
30
En

Listening to DAB radio (R-N402D)

SLEEP
B
SPEAKERS
OPTICAL
CD
LINE 2
LINE 3
USB
BLUETOOTH
BAND
DISPLAY
BAND
TUNING
PRESET
Selecting a DAB radio station for
reception
You can select a DAB radio station from the stations
stored by the initial scan.
DIMMER
A
COAXIAL
LINE 1
NET
TUNER
TUNER
MODE
MEMORY
1
Press TUNER to select "TUNER" as the input
source.
2
Press BAND to select the DAB band.
3
Press TUNING jj / ii to select a DAB radio
station.
DAB
BBC Radio 4
Notes
• "Off Air" appears when the selected DAB radio station is
currently not available.
• When the unit is receiving a secondary station, "2" appears next
to "DAB".
SLEEP
B
SPEAKERS
OPTICAL
CD
LINE 2
LINE 3
USB
BLUETOOTH
BAND
DISPLAY
BAND
TUNING
TUNING jj / ii
PRESET

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Musiccast r-n402dR-n402R-n402d

Table des Matières