Cleaning, Maintenance And Ordering Of Spare Parts; Disposal And Recycling - EINHELL DSL 250/2 Instructions D'origine

8. Cleaning, maintenance and
ordering of spare parts
Danger!
er
Always pull out the mains power plug before star-
ting any cleaning work.
n-
nd
8.1 Cleaning
•
Keep all safety devices, air vents and the
ct
motor housing free of dirt and dust as far as
he
possible. Wipe the equipment with a clean
ad-
cloth or blow it with compressed air at low
pressure.
•
We recommend that you clean the device
immediately each time you have finished
using it.
•
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use
you cleaning agents or solvents; these could at-
tack the plastic parts of the equipment. Ensu-
ia- re that no water can seep into the device. The
cial ingress of water into an electric tool increases
the risk of an electric shock.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
ler
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
ver, Type of machine
•
n- Article number of the machine
•
d Identification number of the machine
•
oil Replacement part number of the part required
eep For our latest prices and information please go to
www.isc-gmbh.info

9. Disposal and recycling

The equipment is supplied in packaging to pre-
of vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
ho- and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
Anl_DSL_250_2_SPK9.indb 15 Anl_DSL_250_2_SPK9.indb 15
GB
- 15 -
18.04.2017 10:45:00 18.04.2017 10:45:00