Panasonic ER‑SB60 Mode D'emploi page 14

Detail trimming attachment
• The trimming height cannot be adjusted.
► How to use the detail trimming attachment
Slide the detail trimming
attachment to switch the position
of the blade to be exposed
depending on the location to cut.
► Trim the beard in tight sections or to detailed form
Move the blade along the skin to
trim.
14
ER-SB60_40_EU.indb 14
ER-SB60
(Trimming height: approx. 0.5 mm)
• The appliance cannot trim hair to lengths less than 0.5 mm.
► Trimming the downy hair
Holding the appliance with the
power switch facing outwards, trim
by bringing the blade in contact
with the skin.
► Design precise lines
1
2
Without the attachment
Place the blade at a right angle
on the edge of where you want
to make a precise line.
Move the blade away and down
from the area you want to leave,
and cut the remaining beard.
2017/05/25 11:00:22