Using The Bluetooth ® Devices - JVC KD-ADV6580 Manuel D'instructions

Cautions:
• Avoid using the USB device if it might hinder your safety driving.
• While "READING" is shown on the display:
– Do not pull out and attach the USB device repeatedly.
– Do not pull out or attach another USB device.
• Do not start the car engine if a USB device is connected.
• This unit may not be able to play the files depending on the type of USB device.
• Operation and power supply may not work as intended for some USB devices.
• You cannot connect a computer to the USB input terminal of the unit.
• Make sure all important data has been backed up to avoid losing the data.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause
damages to the device.
• Some USB devices may not work immediately after you turn on the power.
• The detect time and response time may be very long for some USB devices (such as Digital Audio Player, HDD,
etc.).
• For more details about USB operations, see page 49.
Using the Bluetooth ® devices
For Bluetooth operations, it is required to connect the Bluetooth adapter (KS-BTA200) (not supplied) to the CD
changer jack on the rear of this unit.
• Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check the countries where you may use the Bluetooth ® function.
To use a Bluetooth device through the unit ("BT-PHONE" and "BT-AUDIO") for the first time, you need to
establish Bluetooth wireless connection between the unit and the device.
• Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be
registered in total.
• Only one device can be connected at a time for each source ("BT-PHONE" and "BT-AUDIO").
See page 50 about warning messages for Bluetooth operations.
OPERATIONS & EXTERNAL DEVICES 23