Listening To The Radio; Storing Stations In Memory - JVC KD-ADV6580 Manuel D'instructions

Listening to the radio

1 Select "FM" or "AM."
2
Search for a station to listen—Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same button
again.
• You can also search for a station manually—Manual Search. Hold either one of the
• When receiving an FM stereo broadcast with sufficient signal strength, the ST indicator
Changing the display information
= =
Frequency Clock Station name *
beginning)
* If no title is assigned to a station, "NO NAME" appears.
To assign a title to a station, see page 44.
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
• See also page 40.
=
[Turn]
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
buttons until "M" flashes on the display, then press it repeatedly.
lights up on the display.
=
(back to the
[Press]

Storing stations in memory

Automatic presetting (FM)— SSM (Strong-
station Sequential Memory)
You can preset up to 18 stations for FM.
1
While listening to a station...
2
Select the preset number range you want to
store.
3
Local FM stations with the strongest signals are
searched and stored automatically.
• To stop searching, press
To preset other 6 stations, repeat from step 1 again.
OPERATIONS
4 ¢
/ .
11