Preparing For Use; Inserting / Replacing The Batteries - SilverCrest HG00783A Instructions De Montage, D'utilisation Et Consignes De Sécurité

Note: Only use the screws and dowels supplied for the assembly of
the device.
Mount the receiver (see Fig. D)
Mount the transmitter (see Fig. E)

Preparing for use

Inserting / replacing the batteries

Insert the batteries to provide power to the device before prepar-
ing it for use.
CAUTION! Use the indicated battery types only. Failure to ob-
serve this advice may result in damage to the product.
Receiver (see Fig. B):
Remove the battery compartment cover
device.
Remove the used batteries, if present.
Insert 3 batteries (1.5 V
Note: Ensure correct polarity. This is indicated in the battery
compartment
Close the battery compartment
Transmitter:
Remove the holder
the transmitter and remove the rubber cover
, type AA).
.
8
by pressing the lock
12
from the back of the
6
.
8
from the back of
11
(see fig. C1).
15
GB/IE 11