Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Problem
Unit will not start.
Battery won't charge
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest
you or call the BLACK+DECKER help line at 1-800-544-6986.
WARNING:
SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection
and replacement) should be performed by
a BLACK+DECKER factory service center or a
BLACK+DECKER authorized service center. Always use
identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
•
WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
•
COnFiRMATiOn OF OWnERshiP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
•
FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
Register online at www.blackanddecker.com/register.
TROUBLESHOOTING
Possible Cause
•
Battery not installed properly.
•
Battery not charged.
•
Battery not inserted into charger.
•
Charger not plugged in.
•
Surrounding air temperature too
hot or too cold.
To assure product
Possible Solution
•
Check battery installation.
•
Check battery charging requirements.
•
Insert battery into charger until green LED
appears. Charge up to 8 hours if battery
totally drained.
•
Plug charger into a working outlet.
Refer to Important Charging Notes for
more details.
•
Check current at receptacle by plugging in
a lamp or other appliance.
•
Check to see if receptacle is connected to
a light switch which turns power off when
you turn out the lights.
•
Move charger and tool to a surrounding
air temperature of above 40 °F (4.5 °C) or
below 104 °F (+40 °C).
English
9
Publicité
Table des Matières
