Listening To Dab Stations (Crx-N560D Only); Initial Scan; Tuning In Dab Stations - Yamaha CRX-N560 Mode D'emploi

Listening to DAB stations
You can listen to radio of higher quality sound with Digital Audio Broadcasting (DAB) and DAB+ (upgraded version of DAB).
Connect the supplied antenna (

Initial scan

Press repeatedly to select [DAB].
• Initial scan starts automatically when you select [DAB]
for the first time.
• When scanning is complete, the number of receivable
DAB stations is shown on the front panel display
momentarily, and the first station stored in station order
is played.

Tuning in DAB stations

1
Press repeatedly to select [DAB].
• When the unit cannot receive the DAB signal, "Off
Air" is shown on the front panel display.
2
Press TUNING / to select a DAB
station.
Secondary indicator
(appears if station has a sub station)
P.10) and perform an initial scan before you tune into DAB for the first time.
(CRX-N560D only)
1
RADIO
OPTION
/ ,
ENTER
2
TUNING
/
• You can also perform initial scan from the option
setting.
1 Press when the source is DAB.
- Option menu is shown on the front panel
display.
2 Press / to select [Initial Scan] and press
.
- Initial scan starts and finishes automatically.
• If the initial scan is performed, stored DAB station
information and preset DAB stations are cleared.
• This unit can receive only Band III DAB frequencies.
Frequency in MHz/Channel label
23
En