Playing Repeatedly (Mp3 Disc); Use The Usb; For Devices With Usb Cables; For Memory Cards - Hitachi AXM649BT Notice D'utilisation

Playing Repeatedly (MP3 disc)

ONE, ALB and ALL repeat play can be set by pressing the Mode button (
First press : To repeat the same track, the words "
Second press : To repeat playing album, the words "
Third press : To repeat playing all tracks on a disc, the words "
will blink.
Fourth press : To play tracks randomly, the words "
Fifth press : To cancel the repeat playing, the word "
 Repeat A-B can be set by pressing the repeat A-B button (
First press : Select the start point, the words "A-" will stay lit.
Second press : Select the end point, the words "A-B" will stay lit.
Third press : To cancel repeat play, the words "A-B" will disappear.
Note: A-B repeat function can only be used within the same track.

Use the USB

For devices with USB Cables:

1. Insert one plug of the USB cable (not supplied) to the
2. Insert the other plug of the USB cable to the USB output terminal of the USB device.

For memory Cards:

1. Insert the memory card into a card reader (not supplied).
2. Use a USB cable (not supplied) to connect the card reader into the

USB Storage Device Data Protection

Always insert the USB device in the correct direction. Failure to do so may result in damage

to the USB device and this unit.
Do not remove the USB device while it is being accessed.

Electrical interference and electrostatic discharges may cause the USB device to malfunction

and suffer damage, resulting in data loss.
It is strongly recommended that any important data is backed up on a PC to protect against corrup-
tion, data loss or device malfunction. Please note that our company shall not accept any liability for
damage or loss of stored data.
Note: USB connection is not compatible with all hard drive models.
01_AXM649BT_GB_P41013409-A101_20 Mar 13.indd 20
TRK
TRK
TRK
By connecting an USB mass storage device (including USB flash
memory, USB flash players or memory cards) to this unit, you can
enjoy the device's stored music through the unit.
1. Insert the USB device's USB plug into the
front of unit.
2. Press the USB button (
function select button on the Amplifier to select the USB
function. The word "USB" will be displayed on the front panel.
3. The device's stored music will be played automatically.
4. When you store more than one folder in the USB flash, use the
a bum up button (
ALB+
remote control to select the next/previous folder. Then choose
the track with the next button (
play the folder.
5. The player support the USB music file format of MP3, WMA only.
GB-20
).
MODE
" and " " will blink.
REP
" will stay lit and "
REP ALB
" will stay lit and "
TRK
" will stay lit and " " will blink.
SHUF
" will disappear.
SHUF
).
A-B
socket on the
) on remote control or rotate the
USB
) or album down button (
) or previous button (
G
socket on the unit.
socket on the unit.
" will blink.
"
REP ALL
) on the
ALB-
) to
H
2013-3-20 9:44:23