Listening To Radio Broadcasts; Tuning In To A Station; Presetting Stations; To Change The Fm Reception Mode - Hitachi AXM649BT Notice D'utilisation

Bluetooth microsysteem
Masquer les pouces Voir aussi pour AXM649BT:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29

Listening to Radio Broadcasts

You can listen to FM stations. Stations can be tuned in manually, automatically or from preset mem-
ory storage.
Caution:
Before listening to the radio, please check that the FM Antenna is correctly connected and adjusted
for length and direction.

Tuning in to a Station

1. Rotate the Function button (
the remote control. The word "TUNER" will be displayed on the front panel.
2. Select a station using one of the following methods.
 Auto Tuning
Press and hold the Tuning Backward/Forward button (
unit for one second or more, the frequency changes down or up automatically until a station is
found.
 Manual Tuning
Repeatedly press the Tuning Backward/Forward button (
the unit to change the frequency until you find the station you want.
 Preset Tuning (Available only after the stations are preset)
Repeatedly press the Preset Up/Down Switch button (
unit to select the desired preset number. Its band and frequency are displayed on the front
panel.

Presetting Stations

You can manually preset up to 20 FM stations.
To tune in to the desired station:
1. Press the Program button (
2. Press the Preset Up/Down switch button (
number.
Note: If you select more than 20, the preset number will be changed to "1" automatically.
3. Press the Program button (
broadcast frequency display.
4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset number.
Note: If the unit is unplugged or if a power failure occurs, the preset stations will not be erased af-
ter being stored.

To change the FM Reception Mode

Press the Mode button (
tion mode.
01_AXM649BT_GB_P41013409-A101_20 Mar 13.indd 16
) on the unit or press the Tuner Function button (
FUNCTION
) on the remote control, the preset number will be displayed.
PROG
H
) again to store the station. The display will return to the
PROG
) to select the Stereo or Mono channel to receive the best FM recep-
MODE
GB-16
/
) on the remote control or on the
D
C
/
) on the remote control or on
D
C
/
) on the remote control or on the
H
G
/
) on the remote control to select the preset
G
) on
FM
2013-3-20 9:44:05

Publicité

Table des Matières
loading

Table des Matières