Other Operations - Sony DAT Walkman TCD-D8 Mode D'emploi

5
REC/ID WRITE
REC MUTE
6
PLAY
or
Tips
• To begin recording
immediately, press the
PLAY ( button while
pressing the REC button
in the stop or playback
mode.
• The input source is
displayed when the
source is changed
during recording,
monitoring, or in the
recording pause mode.
• The sampling frequency
is displayed when the
sampling frequency is
changed during
recording.
Notes
• Changing the sampling
frequency while
recording may cause
temporary sound
dropout to be recorded.
• Connecting or
disconnecting the plug
from the PHONES/
LINE OUT jack while
recording may cause
noise to be recorded.
• Noise may be recorded
when the display light is
turned on while
recording. In this case,
turn it off.
10 EN
Recording
Press the REC and PAUSE P
buttons.
PAUSE
The tape-corder enters the pause
mode. When the REC button only
is pressed, the tape-corder enters
the recording monitor mode (see
page 18) and does not begin
recording.
Press either the PLAY ( or
PAUSE PAUSE P button.
The recording begins.

Other operations

To
Stop recording
Pause recording
Release pause
Check the input source
Check the sampling
in the stop mode
in the recording pause
mode
frequency
Press
STOP p
PAUSE P
PAUSE P or PLAY (
REC twice
REC
Press the button until the
following display appears.
PLAY ( in the recording
mode
The following display
appears while the button is
pressed.