Items Supplied; Technical Data; Proper Use - EINHELL DTA 25 Instructions D'utilisation

Anleitung DTA 25 und DTA-P 40
GB
Dear Customer,
Before you use the stapler for the first time, please
read these instructions and note the information for
the tool's operation and maintenance.
Always keep this manual with the tool.

1. Items supplied

1 pneumatic stapler
1 plug-in R 1/4"
1 socket-wrench
1 socket-wrench
1 socket-wrench

2. Technical data

Permissible working
pressure max.
Air consumption approx.
Staple width
Staple length
Recommended hose
diameter
Air quality
Compressor capacity
approx. 250 l/min. equivalent to a motor
rating of 2.2 kW
Work settings
6 bar working pressure set at the pressure reducer
or filter pressure reducer
Please note:
When working with the stapler, be sure to wear
the necessary protective clothing, particularly
goggles.
Observe the safety regulations.
4
13.11.2001 7:38 Uhr
DTA 25 DTA-P 40
3 mm 3 mm
4 mm 4 mm
5 mm
DTA 25 DTA-P 40
6 bar 6 bar
0.11 l/min. 0.22 L/min.
5 mm 5.7 mm
8 - 25 mm 19 - 40 mm
9 mm i Ø 9 mm i Ø
cleaned and oiled
Seite 4
3. Illustration
DTA 25
A
DTA-P 40
A
Item. Description
A trigger lever
B magazine
C magazine lever
D plug-in nipple for the air supply
E air connection

4. Proper use

The stapler is a pneumatic tool for universal service.
The exhaust air leaves the housing to the front.
Repairs and maintenance work are to be carried out
only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you use a
hose that has too small an inner diameter or
which is too long.
E
D
C
B
E
D
C
B