Connection; Necessary Tools And Items; Devices Connection; Settings - Sony STWA-C101 Mode D'emploi

Connection

Necessary Tools and Items

• AC adaptor (output voltage +5 V±5% DC,
output current 1 A or more)
Polarity
Plug dimensions
Outside diameter: 4.0 mm (
Inside diameter: 1.7 mm (
1
• Four screws ( / -inch or M6
4
recommended; use ones appropriate to
your mounting plate) and a screwdriver
• Two LAN cables (category 5 straight type,
RJ-45) (Use a shielded-type cable for
AES/EBU digital audio connection.)
(When AES/EBU digital audio is not used,
only one LAN cable is necessary.)
• Stereo phono cable (The phono cable is
necessary only when analog audio is
used.)

Devices Connection

Be sure to disconnect the AC adaptor from
the unit before connecting other cables.
After connecting other cables, plug the AC
adaptor cable into the DC IN connector of
the unit. Check that the POWER indicator
comes on.
12
GB

Settings

You can use the web browser of a computer
to configure the unit.
• Operating system
• Recommended web browser
Follow the instructions below to open the
3
/ inches)
16

setting screen.

3
/ inches)
32
1
2
3
You can use the reset button to restore the unit
to the factory default settings, including the IP
address. Press and hold the button for about
five seconds with a thin, straight object (such as
an opened paper clip).
Computer System
Requirement
Windows 7
Internet Explorer 8
Setting Screen
Start the web browser.
Enter the text below into the address
line of the browser.
http://xxx.xxx.xxx.xxx/
xxx.xxx.xxx.xxx: IP address for the unit
The default IP address for the unit is
192.168.10.100.
Enter the user name and password and
click "OK" to open the setting screen
of the unit.
User name: admin
Contact your Sony representative for the
password.
Note