Bicycle Mark Button (Walk Assistance); Speed Display , Distance Display And Gear Position - Panasonic FLYER Mode D'emploi

Bicycle mark button (Walk assistance)

This is the push-assistance function that assists you by providing drive up to 6 km/h, for example, when you are carrying a heavy load.
1) Hold down the bicycle mark button (Walk assistance).
● When you release your finger from the bicycle mark button (Walk assistance), or the electric bicycle exceeds a speed of 6 km/h, the
function will not be activated.
Note
● When the pedals hit the curb or other objects and the push-assist function stops, hold down the bicycle mark button (Walk assistance) again.

Speed display , distance display and Gear position

[MODE] button
Assist mode switching
Speed indication
Fig. 1
The current speed is displayed at Speed indication at all times. (Fig. 1)
For the distance display and battery level, items and numerical values are displayed at Text indication and Value indication, respectively.
(Fig. 1)
Items can be switched.
[TRIP]
[AVG]
[MAX]
[ODO]
[RANGE]
Remaining battery capacity
Gear position
(Rear derailleur)
* This is a rough value because the remaining battery capacity is calculated using the amount consumed.
1
* If Di2 related devices are not installed, there is no gear position display.
2
1) Press the [MODE] button on the operation unit. (Fig. 3)
● Each press of the button switches the item.
Note
● The numerical values for the [TRIP], [AVG] and [MAX] display items can be reset simultaneously.
● To reset, press the [MODE] button, display [TRIP], [AVG] or [MAX], and hold down the [MODE] button until "0" is displayed.
Chapter 3 Methods of Use — Console
Value indication
Text indication
Displays the distance travelled.
Displays the average speed.
Displays the maximum speed during travel so far.
Displays the total distance travelled after purchase.
The total distance travelled is set to "0" by holding down the reset button on the rear of the display unit and
the [MODE] button on the operation unit at the same time. (Fig. 2)
Displays how far the electric bicycle can travel (estimated distance) on the remaining battery power under
fixed conditions (e.g. assist mode, route profile).*
Displays the battery level as %.
Displays the gear position of the rear derailleur (Di2).*
Reset button
[MODE] button
Fig. 2
1
2
156
Shifting button
Gear shifting
Fig. 3