Télécharger Imprimer la page

Recording To A Disc; Basic Recording Operation; Copy; Track No - Yamaha CDR-D651 Mode D'emploi

Masquer les pouces Voir aussi pour CDR-D651:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
RECORDING

RECORDING TO A DISC .......................................................

1
NATURAL SOUND CD RECORDER CDR–D651
POWER
A
DISC

Basic Recording Operation

Recording is done on disc tray B of this unit. Disc tray A is
used for playback only. Recording operation is described
with buttons on this unit and the remote control. These
button names are noted in the order of "button name
(remote control button name)".
To load a disc
1.
Press POWER on the front panel to turn on the
power.
2.
Press v for disc tray B on your right (OPEN/
CLOSE B on the remote) to open the disc tray.
3.
Load a disc to be used for recording, correctly
aligned in the recessed area of the disc tray with
its recordable side facing down.
When loading an 8 cm (3 in.) disc, place it in the inner
recessed area of the disc tray. Do not put a normal 12
cm (5 in.) disc on top of an 8 cm disc.
4.
Press v (OPEN/CLOSE B on the remote) to
close the disc tray.
Note
You can also close the disc tray by pressing the front edge of
the disc tray gently.
12
E-
2,4
REC MODE

COPY

DISPLAY A
TEXT/TIME
DISPLAY B
PHONES
LEVEL
MIN
MAX
3
MULTI JOG
INPUT
PUSH MODE

TRACK NO.

DISC A
DIGITAL ANALOG
FINALIZE

ERASE

DIGITAL REC LEVEL
B
DISC
Recordable
ReWritable
ANALOG REC LEVEL
REC MUTE
REC
FADE IN/OUT
MIN
MAX
When a new disc is loaded in this unit, this unit performs a
number of internal operations to determine the format and
content of the disc. During this time, "Reading" appears in
the display. This process requires approximately 10
seconds to complete for any type of disc.
Reading
When a CD-R disc without finalization performed or a CD-
RW disc is loaded in this unit, OPC (Optimum Power
Calibration) is automatically performed to make an optimal
recording. OPC optimizes the laser power to the reflectivity
of the disc.
During OPC, "OPC Adjust" appears in the display. This
process requires approximately 15 seconds for a CD-R and
45 seconds for a CD-RW to complete.
Note
OPC data is memorized both in this unit and the disc. This unit
can memorize the OPC data for up to 24 discs. After 24 discs
are reached, the oldest OPC data will be deleted and the newest
one will be added.
OPC process will not be performed on the disc if its OPC data
has been already in this unit's memory. (When Disc Erase is
performed on a CD-RW disc, its OPC data will be also erased.)
OPC Adjust
After the disc has been read and any necessary internal
adjustments have been performed, one of the following
displays appears, and normal operation is possible.
When a prerecorded audio CD is loaded in this unit
1
When a new CD-R or CD-RW disc is loaded in this unit
0
COPY
OPEN/CLOSE
B
A
2,4
FADE IN/OUT
TRACK NO.
REC MUTE
REC
WRITE
REC MODE FINALIZE
ERASE
DISPLAY
L
dB
–60
–30
–I0
–6 –4 –2 –I
0 OVER
R
L
dB
–60
–30
–I0
–6 –4 –2 –I
0 OVER
R
CD
:
L
dB
–60
–30
–I0
–6 –4 –2 –I
0 OVER
R
CD–R
:
L
dB
–60
–30
–I0
–6 –4 –2 –I
0 OVER
R

Publicité

loading