DeWalt DP3700 Guide D'utilisation page 9

WARNING: RISK OF ELEC TRI CAL SHOCK
WHAT CAN HAPPEN
• Spray di rect ed at elec tri cal
outlets or switch es, or ob jects
con nect ed to an elec tri cal
circuit, could re sult in a
fatal electrical shock.
WARNING: RISK OF INJURY FROM LIFTING
WHAT CAN HAPPEN
• Serious injury can result
from attempting to lift too
heavy an object.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
HOW TO PREVENT IT
• Unplug any elec tri cal ly
op er at ed product before
attempting to clean it. Direct
spray away from electric
out lets and switches.
HOW TO PREVENT IT
• The pressure washer is too
heavy to be lifted by one
person. Obtain assistance
from others before lifting.
INSTALLATION
Pressure Washer Assembly (Fig. 1)
1. Place handle assembly (A) onto frame, depress
the snap buttons, and slide the handle assembly
onto the frame (B) until snap buttons are secured
in place.
CAUTION: Risk of personal injury. Avoid placing
hands between handle and frame when assembling
to prevent pinching.
2. Attach high-pressure
hose (C) to quick
connect spray gun
3. Connect quick
connect spray wand
(E) to spray gun.
4. Remove the set screw
from spray gun
extension using a
3/16" hex wrench.
5. Thread the side handle
(R) into spray gun
extension and tighten
to desired position.
6. Place the nozzle
holder (G) onto the
panel assembly (F)
and push each noz-
zle holder into
place.
9