Connections - Yamaha A-S2000 Mode D'emploi

Connections

Speakers A
(R channel)
+ -
Speakers B
(R channel)
Caution
• Do not let the bare speaker wires touch each other or do not let
them touch any metal part of this unit. This could damage this
unit and/or the speakers.
• All connections must be correct: L (left) to L, R (right) to R,
"+" to "+", and "–" to "–". If the connections are faulty, no
sound will be heard from the speakers, and if the polarity of the
speaker connections is incorrect, the sound will be unnatural
and lack bass. Also, refer to the owner's manual for each of
your components.
14
En
CD player with
RCA jacks
SPEAKERS R CH
A
B
+ -
CD player with
XLR jacks
INPUT
CD
TUNER
BAL
R L
CD
R L
GND
PHONO
Ground
Turntable
• Use RCA unbalanced cables to connect other components
except speakers. Use "male" XLR balanced cables to connect a
CD player with XLR balanced output jacks to the CD BAL
jacks of this unit.
• Connect your turntable to the GND terminal to reduce noise in
the signal. However, you may hear less noise without the
connection to the GND terminal for some record players.
Tuner
LINE2
LINE 1 PB REC MAIN IN PRE OUT
L
R
DVD player,
etc.