Counting - Acculab VICON VIC-303 Mode D'emploi

Counting

Purpose
With the Counting program you can determine the number of parts or items.
Example: Determine the number of uncounted parts; weigh in the selectable reference sample quantity (in this example: 20)
Step
1. Select application program
2. Select Counting
3. Confirm setting
Symbol " " on the display: application is active
4. Place empty container on the balance/scale
5. Zero the balance/scale
6. Place reference sample quantity (20)
on the balance/scale
7. Select reference sample quantity:
in increments of 1 (1, 2, 3, ..., 99) or
in increments of 10 (10, 20, 30, ...,100)
8. Confirm selected reference sample quantity
9. Place uncounted parts on balance/scale
10. Toggle display between mean piece weight,
total weight, and quantity
11. Unload the balance/scale
12. Counting application: clear the reference value
13. Reactivate Counting (if no other
application program has been selected)
14. Repeat procedure starting from Step 5.
Key (or instruction)
(ZERO) > 2 sec
(F) repeatedly
(ENTER)
(ZERO)
(F) repeatedly (briefly) or
(F) > 2 sec.
(ENTER)
(F) repeatedly
(ENTER) > 2 sec
(F)
Display
7