senya SYCK-G045 Notice D'utilisation page 18

16 Removable thermostat
19 Handle of base
II.2 ASSEMBLY
1. Remove all packaging from the appliance.
2. Check that the appliance is not damaged in any way.
3. Use a soft,damp cloth to wipe the appliance free of any dust.
4. It is important to assemble the barbecue correctly in order to avoid any risk of harm or
improper use.
1
2
3
4
17 Thermostat indicator lamp
20 Screws B
Install the Support feet x5(12)into the Support
base(11)properly.There will be a"click"sound when
the Support foot is fixed completely.
1. Place the Washer(13)onto the Support base
(11).
2. Then use tools install the Screws A(14)into the
washer to fix the Support feet(12)and Support
base(11)firmly.
1. Put the Decoration ring(9)on the Lower
support(10),Use the Threaded rod(8) to rotate
clockwise and install it with the Upper
support(7),ensure that they are fixed well.
2. Connect the Support base(11) and the Lower
support(10) together to form the complete grill
stand base.
Note:
The Lower support(10) is shorter,and its one
end is also smaller,for inserting into the
Support base(11).
The grill can be used with or without this grill
stand base.
1. Install the Screw B(20) into the Upper
support(7),then put the Condiment tray(6),making
sure that the tray is fixed well.
2. Place the Base(5) onto the Upper support(7).
Note:
There are two holes on Upper support(7) to
fix the Screw B which provides two heights
for the Condiment tray(6).
Make sure to place the grill stand base on a
dry,flat and stable surface.
17
18 Hole of appliance socket