TAKOON Chicken loop Guide D'utilisation page 2

Reducing the length of the de-power line:
You can reduce the length of the de-power line. Disassemble the de-power line from the adjustment strap. Undo the
knot on the PU and cut it at the required length. Tie a knot to connect the depower line and the adjustement strap.
Don't forget to trim the rear flying lines, reducing their length by the same ammount as the de-power line.
cut the PU at the
required length
Undo the knot on the PU
Trim the rear
lines
Re-tie using
a chair knot