Technical Data; Ordering Replacement Parts; Cleaning, Maintenance And Ordering Of Spare Parts; Carbon Brushes - NIGRIN 72129 Instructions De Service

Anleitung_Nigrin_Poliermaschine:_

5. TECHNICAL DATA

Voltage: 230V ~ 50 Hz
Power rating:
Speed: 1000-3000 min
Polishing / sanding disk diameter:
Connection thread:
LWA sound power level:
LPA sound pressure level:
Vibration aw
Totally insulated
Weight:
6. Cleaning, maintenance and ordering
of spare parts
Always pull out the mains power plug before starting
any cleaning work.
6.1 Cleaning
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
We recommend that you clean the device
immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep
into the device.
Wash the polishing attachments only by hand and
let them air-dry. Use only a mild soap and a damp
cloth.

6.2 Carbon brushes

In case of excessive sparking, have the carbon
brushes checked only by a qualified electrician.
Important! The carbon brushes should not be rep
laced by anyone but a qualified electrician.
6.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
25.01.2007 16:31 Uhr

6.4 Ordering replacement parts

Please provide the following information on all orders
for spare parts:
1100 W
-1
Model/type of machine
180 mm
Article number of the machine
M14
ID number of the machine
Replacement part number of the required spare
98 dB(A)
part
87 dB(A)
6,76 m/s 2
For our latest prices and information please go to
II/
www.ISC-GmbH.info
2.2 kg
Seite 7
GB
7