Automatic Switch-Off - Hema 80.30.1514 Mode D'emploi

EN Bathroom scales instructions
1. Use
STEP 1. Place the scales on a hard, flat surface on the floor (not on carpet or other soft
floor covering).
SETP 2. Stand on the scales. The scales will switch on automatically. Keep standing
straight on the scales without moving and wait until the numbers stop changing.
2. Automatic switch off
When you step off the scales, it will switch itself off automatically after 8 seconds.
3. To change unit of weight
There is a button on the underside of the scales which you can press to change the
unit of weight. See illustration below.
Unit switch
Press the button to change the unit of weight from kg (kilo), lb (pound) or st (stone).
4. Overload
If the scales are overloaded with more than 152 kg, the following code will appear:
If the code appears, step off the scales to avoid damage.
3