Mains Connection - Conrad Electronic MPA - M.I.L.L.Y. 2.0 MkIII Notice D'emploi

10. Mains Connection

The mains outlets to which the PA system is connected must be easily accessible to quickly
separate the device from the mains voltage in case of an error.
The PA system and all connected devices must be turned off when connecting the voltage
supply.
Ensure that all the electrical connections and connection cables between the different devices
and any extension cables comply with the regulations and comply with the operating instructions.
• Insert the non-heating appliance plug of the mains cable into the mains connection (8).
• Plug the power plug of the power supply cable into a wall socket.
• The POWER switch (7) is used to switch the PA system on and off.
Position "O": Device is switched off.
Position "I": Device is turned on.
When the device is switched on, the POWER indicator (4) lights up.
28