Disposal Of Equipment - FLAIG TE PML Série Manuel D'emploi Et D'entretien

5. Periodic check-ups
Check the mechanical conditions of the magnetic poles of the hoister (load contact members). If they are
damaged or very worn, immediately call FLAIT TE before using the hoister further. The max. load capacity
has to be checked annually by the supplier or an authorized workshop. Observe the accident prevention
regulations. All instruction signs must remain on the lifting magnet, contact the distributor if lost!
FLAIG TE is absolutely not responsible for any malfunction or accident due to repairs or modifications made
to the hoister by the customer.
6. Storing
If the need arises to store the equipment for a certain amount of time observe the following instructions:
• Clean all components.
• Cover the equipment with a waterproof sheet.
• Place the equipment in an isolated area in order to avoid tripping on it and lift the hook of the hois
ting device at a height of more than 2.5 m.
• Keep the equipment in a dry environment.

7. Disposal of equipment

If the need arises to dispose of the equipment, it is mandatory to observe a few fundamental rules for the
safeguarding of the environment. Protective coverings, flexible pipes, plastic or non-metal material should
be dismantled and disposed of separately.
17