Remote Control - Quilo QE1S Mode D'emploi

USE & OPERATION (CONTINUED)

REMOTE CONTROL

Note:
• The remote control requires a CR2032 (1 x 3V) coin type or equivalent battery for replacement.
• Open the battery compartment at the back of the remote control and insert the battery inside.
Care must be taken to insert the batteries according to the correct polarity (+ / –) markings shown
inside the battery compartment.
• Always point the remote control signal transmitter towards the unit when operating. Make sure that
the signal path is not obstructed.
• Remove the batteries if the unit is not going to be used for an extended period of time.
• Do not drop the remote control.
• Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.
• Do not mix old and new batteries.
• Do not recharge the battery.
• Exhausted batteries are to be removed from the product and safely disposed of as per local
regulations.
• Do not dispose of batteries in fire. Batteries may explode or leak.
WARNING: Caution for ingestion of the small battery. Keep away from children and animals.
Power : ON / OFF
Fan Speed : Low / Medium / High / Auto
Swing : Controls the motion of the louvers
Cool : Evaporative cooling on/off
Timer : Controls the Timer function for automatic off
Quiet/ Turbo : Quiet/ Turbo Mode
Mode
6
EN