SCS HASF1200500WGS Manuel D'installation Et D'utilisation page 14

ATTACHING AND CONNECTING THE ELEMENTS
1) 12 V DC power supply / battery 9V
5) AV input
2) 12 DC power
supply
Fitting the system components :
1) Connect the camera(s) to their power supply, using the transformer supplied or
the 9 V battery adaptor.
2) Connect the interior monitor to the mains with the adaptor supplied.
3) Fit the cameras to their support (wall, ceiling, etc.).
4) Switch on the interior monitor by pressing the POWER button; the monitor will
automatically detect the cameras.
5) To connect the monitor to a television set, use the cable supplied. Plug it into the
INPUT AV sockets on the right-hand side of the monitor.
ENGLISH
3)
4) Power
3