Publicité
Vehicle VIN must be updated with the sales code of the added accessory in order to enable system functionality.
Using the DealerCONNECT website and the scan tool, complete the procedure below.
1. Log on to https://dealerconnect.chrysler.com
2. In the service tab, inside the Warranty Administration box, locate “Vehicle Option Updates.” Enter the vehicle
VIN and add the sales code
3. Confirm that the new sales code has been successfully added to the VIN. With the scan tool connected to both
the internet (via Ethernet port or wireless connection) and the vehicle, follow the steps below:
4. Use the scan tool to run “Restore BCM Proxi configuration” which can be found in the “Vehicle Preparations” Tab
of the main topology screen. Follow the prompts and the system will upload the new vehicle proxi configuration
to the BCM.
5. Once that is complete, run “Proxi Configuration Alignment” found in the “Vehicle Preparations” Tab, to update the
rest of the ECU’s on the vehicle with the proxi configuration that is stored in the BCM.
6. Follow the step by step instruction on the scan tool to complete the ‘PARKVIEW(TM) REAR BACK-UP CAMERA’
installation.
7. Installation Complete.
1. Log on to https://dealerconnect.chrysler.com
2. Navigate to the ‘Service’ tab and click ‘TechCONNECT’
3. In the ‘Search’ tab, input the VIN then click the Submit button.
4. Navigate to the ‘Service Info’ tab then expand Electrical
- First confirm that the camera is operating to the specifications in the “Operation” document.
- Confirm that the camera is doing the opposite of the “Condition” column in the “Diagnosis and Testing” document.
- If the camera fails any conditions, please refer to “Diagnosis and Testing” ‘Correction’ column and/or expand
Non-DTC Diagnostics
12-2-14
www.mopar.com
TM
(PARKVIEW
Audio/Video
Diagnosis and Testing
) REAR BACK-UP CAMERA) as a “Dealer Installed Option”.
Camera
Operation
Diagnosis and Testing
Diagnosis and Testing
Rear Camera Inoperative.
15
Publicité
