Publicité
1
BEFORE FIRST USE:
1. Remove all packaging.
2 . Wash the parts before use: see 'cleaning'.
3. Read safeguards and warnings
4. Assemble jar with dispenser (5) or with Jar cap (7)
5. Note: Depending on the consistency of the recipe, you may
choose to use either the dispenser or the jar cap.
HOW TO USE
1. Assemble jar with dispenser assembly or jar cap by turning ei-
ther clockwise over jar opening until secure.
2. Attach blender jar onto power base. Blender jar should lock
into place.
Note: The unit will not function unless both Jar and Lid are firmly
locked in place
3. Add liquid ingredients.
Note: Check that the dispensing tap lever is in the off position
before adding ingredients.
● This includes fruit (not frozen), fresh yoghurt, milk and fruit
juices. These can be placed into the Plastic cup to the
level marked LIQUIDS for either 3 or 6 servings.
5. Add ice or frozen ingredients into jar
• This includes frozen fruit, frozen yogurt, ice cream or ice. These
can be added up to the level marked "frozen ingredients" for the
corresponding number of servings.
6. Push the lid onto blender jar and lock into place.
Note: The unit will not function unless both Jar and Lid are firmly
locked in place
7. Either fix the cap onto the lid by turning clockwise or place
the stirrer/pusher in the hole.
• The stirrer/pusher can be used when blending thick mixtures or
when large quantities of frozen items are used.
8. Press or turn to the High setting for up to 30 seconds, this is to
start the mixing process, then press the Pulse button. Allow the
ingredients to blend until smooth.
• Use the stirrer by moving it in a counter-clockwise direction.
9. If using the dispenser, place a sturdy container under the tap
and press down on the dispensing tap lever.
• Thinner drinks may dispense without having to switch on the
power unit.
PARTS/ASSEMbly
5
2
3
Parts
1. Stirrer
4
2. Measuring cup
3. Lid
4. Plastic cup assembly
5. Dispenser assembly
6
6A
6. Power unit button base
7. Jar Cap
7
4
5
Or
7
4
English - 2
Publicité
