PEERLESS Mounts SmartMount SA740P Installation Et Montage page 9

Cable Management
Cords may be routed using cable ties (P).
Attach cable tie anchor (Q) to top or bottom of wall arm (A) using 8/32 x 1/4" phillips screw (R) as shown in
5-1
figure 5.1.
Secure cables to top or bottom of wall arm (A) using cable ties (P) as shown in figure 5.2.
Cords may also be routed using cable management covers (S).
Route cords inside arm slots of wall arm (A). Lock cords into place by snapping cord covers onto mount as shown
5-2
in figure 5.3. NOTE: Be sure arrow on inside of cable covers (S) point toward screen as shown in detail 1.
NOTE: Make sure cords have enough slack to allow full movement of the arm.
DETAIL 1
All manuals and user guides at all-guides.com
R
Q
fig. 5.1
S
fig. 5.3
9 of 42
P
CORD
fig. 5.2
CORD
ISSUED: 07-12-06 SHEET #: 095-9234-12 11-20-09