Publicité
1. Detergent drawer
2. Display window
3. Front door
4. View window
5. Control panel
6. Course button
7. Option button
8. Knob
2. Unpacking and installation
• Removing the shipping bolts
Before using the washing machine, you must remove all of the shipping bolts :
1. Take the top cover down.
2. Loosen and take the two bolts down from the fasten stand, the spring block
under the stand also be taken out.
3. Instal the cover as before.
4. Keep the shipping bolts and spring block for future shipment use.
• Adjusting the levelling feet
If the floor is uneven, losen the leg bolt by turning it with your hand until it is at the
desired height. Then tighten the locking nut by turning it with the wrench.
• Connecting the water supply hose
1. Take the cold water supply hose and connect to the cold water supply intake
on the back of the machine. Tighten by hand.
All manuals and user guides at all-guides.com
9. Power cord
10. Drain hose
11. Back cover
12. Water supplu hose
13. Tie strap
9
Publicité
