Télécharger Imprimer la page

Konwin FH04 Manuel Du Propriétaire page 4

Publicité

Voltage
120 Vac
Tip-Over Safety Feature
This heater is equipped with a shut-off safety feature. Once the
heater is tipped over, an internal switch will automatically shut the
heater off. Once the heater is restored an upright position, the
heater will reset. To continue operation, press the power button
on the control panel or remote control.
Overheat Safety Feature
This heater is equipped with an overheat safety feature. When the
heater's internal components reach a certain temperature that
could cause overheating and possible fire, the heater will automat-
ically shut off.
A thermal overload protector is built in to prevent over- heating. When an
"overheat" temperature is reached, the heater will automatically shut off. Operation can
resume only when the user resets the unit.
To reset the unit, unplug the heater, ensure the power is turned off, and wait 15
to 20 minutes for the unit to cool down.
Follow INSTRUCTIONS FOR USE to return heater to operating mode.
It is normal for the power cord to feel warm to the touch; however, a loose fit between
the outlet and the plug may cause overheating of the plug. If this occurs, try inserting
WARNING
the plug into a different outlet. Contact a qualified electrician to inspect the original
outlet for damage.
Frequency
60Hz
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is
wider than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
Wattage(Max)
1500W

Publicité

loading

Produits Connexes pour Konwin FH04