Publicité
Step 1
Set up your TV
Ready for the step-by-step? You're only minutes away from TV bliss!
Remove your TV from the box
Be careful, it's heavy!
To use the stand
To prevent damage to the screen, carefully place your TV on a soft, cushioned surface.
A
Put the column of the stands into the TV, align the stands with the screw holes located on
B
the TV. Secure the stands to the TV with four (4) screws.
Note: Make sure the installation direction of the stand is the same as illustrated.
A A
B
To use the cable clips
A
On back of the TV, insert the two cable clips into the back of TV on the left and right.
Stick the two cable clips on the TV stands on the left and right.
B
Attach the two cable clips to the TV stands on the left and right.
C
Note: Make sure the installation direction of the cable clip is the same as illustrated.
50''/55''/65''
A
B
Warning:
Never place a television set in an unstable location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be avoided by taking simple
precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television set.
- Only using furniture that can safely support the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
- Not placing the television set on tall furniture (for example, cupboards or bookcases) without
anchoring both the furniture and the television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located between the
television set and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained and relocated, the same considerations as
above should be applied.
A
50''/55''/65''/75''
Screws
(50''/55''/65'': M4x30mm 75'': M5X25mm)
C
5
B
55''/65''/75''
75''
Publicité
