Publicité
□
CASTER CONFIGURATION #2: UNIT WILL BE MOVED FREQUENTLY
•Attach 2 swivel casters (D) to the cabinet (A), on the same side as the handle (B) and attach the other 2 swivel casters (D)
to the center of the cabinet (A). Insert bolts (AA) and swivel caster (D) into the cabinet (A).
•Attach 2 fixed casters (C) to the side opposite of the handle (B) by inserting bolts (AA) and the fixed casters (C)
into the cabinet (A).
□ Tighten all casters with supplied wrench (CC) or 12 mm wrench/socket.
□ Return the cabinet (A) to its upright position.
Operation
1
Removing the drawers
□
Fully extend the empty drawer.
□
u P
h s
u
p
t
e h
o
e n
down on the other release lever.
□
Pull the drawer outward until it is released from the
drawer slide.
C
AA
e r
e l
s a
l e
v e
r e
w
h
e l i
pulling
D
2
Re-inserting the drawers
□
Extend the drawer slides.
□
Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
□
Once properly inserted, completely close the drawer
to set the slides in their proper positions.
6
B
A
Publicité
