Publicité
MENU
MENU
DESCRIP-
TION
Axxx
Set Address
Auxx
Static mode
FFxx
Jump mode
CCxx
Fade mode
EExx
Pulse mode
Fxxx
Strobe mode
Auto
Auto mode (Jump, Fade, Pulse and strobe modes in loop)
Soud
Sound mode
Axxx - Setting the DMX address
Press MENU to select AXXX, press Enter to start adjustment. Use the
UP or DOWN keys to set the desired address. Then press ENTER to confirm.
Auxx Selection of STATIC mode
Press the MENU button until AUXX is displayed. Press ENTER.
The display shows "AU01 to AU15". Select the desired color (with the UP & DOWN keys.
Press ENTER to validate the selection,
Even after switching off and on again, the projector returns to its last validated state.
SUB-MENU
DESCRIPTION
A000 - A512
Setting up a starting DMX address of the fixture
Au1-Au15
Fixed color selection
FF1-FF99
From slow to fast
CC1-CC99
From slow to fast
EE1-EE99
From slow to fast
F000-F255
From slow to fast
Sound sensitivi-
vol1-vol9
ty adjust
bAon
Blackout after 1 seconde without
sound
bAof
Jump mode after 1 seconde without
sound
Publicité
