Publicité
Model no. 011-2510-8
All manuals and user guides at all-guides.com
USING BATTERY "ALLIGATOR" CLAMPS
Connect the battery clamp attachment
to your solar panel first, then connect to
your battery. Ensure the battery clamps
are secure, matching the positive red
clamp (+) to the positive (+) terminal on
your battery. Connect the negative black
clamp (-) to the negative (-) terminal on
your battery.
Battery clamps must be placed on the battery in the
aforementioned order. Wrong connections may cause
sparking or explosion.
TROUBLESHOOTING
Cleaning of the solar panel may be performed with a clean, damp cloth. Any
other maintenance to the unit should be performed by a qualified service
professional or contact our experienced customer service team for further
instruction.
QUESTIONS
Can I overcharge my battery?
Do I need a charge controller?
Can my panel be left outdoors
without a protective covering?
What can be done if the wires are
too short?
How do I know if the panel is
producing voltage?
contact us 1-866-827-4985
WARNING:
CLEANING AND MAINTENANCE
No, this solar battery trickle charger has a low current
that will not overcharge your standard 12 V battery.
No, a solar charge controller is only needed for
panels of 10 watts or greater.
Yes, the solar panel has been weatherproofed and
can be mounted outdoors without any additional
protection.
Contact the manufacturer for a list of additional parts
to purchase.
Measure the voltage of the panel using a voltmeter.
The voltage reading should be between 16 and 21
volts (open circuit) in full sunlight.
WARNING
: Never allow battery clamps to touch:
doing so can cause electric shock.
ANSWERS
7
06
Publicité
